Guitar chord forum - chordie — Capo on the 1st Fret

Re: Capo on the 1st Fret

null@example.com (Guitar Hacker) — Tue, 02 Jul 2013 23:38:07 +0000

Thanks for all the responses....I changed the strings last week..so that eliminates one variable. I think my next step is as BGD suggests....the guitar hospital.

Re: Capo on the 1st Fret

null@example.com (Phill Williams) — Tue, 02 Jul 2013 17:53:47 +0000

the first band i was in was not making much money so i didn't change the strings that often. the effect of this was that tuning was great open, but getting sharp or flat as i progressed up the arm. i'm now slightly better off so the strings get changed more often. i played a strat with trem in those days. could the strings need changing? just a thought

Re: Capo on the 1st Fret

null@example.com (Baldguitardude) — Tue, 02 Jul 2013 13:49:47 +0000

This calls for a repair shop.

Re: Capo on the 1st Fret

null@example.com (beamer) — Tue, 02 Jul 2013 00:57:41 +0000

On one or two of my acoustics, I removed the nut and sanded it down some,, but Its risky. My opinion,
Take it to a good shop. let them fix it. what ever it cost, its cheeper than busting your guitar.

Re: Capo on the 1st Fret

null@example.com (Guitar Hacker) — Mon, 01 Jul 2013 23:13:47 +0000

Ok...an update to my capo dilemma. This capo appears to be position sensitive. I found a capo position on the 1st fret where at least all the strings are evenly sharp as opposed to the low E being very sharp and the high E being slightly sharp. Here's my new issue. I know when a guitar has proper intonation, the open EADGBE should be the same as the EADGBE at the 12th fret. I put my capo on the 12th fret and lo and behold.....its right on. Now....I put the capo on the 5th fret.....and its sharp. I put it on the 2nd fret...and its sharp. As I work my way down the neck...it gets less sharp until I hit 12 and its right on. So...any thoughts?? I'm leery of putting tool to truss rod.

Re: Capo on the 1st Fret

null@example.com (Baldguitardude) — Sun, 30 Jun 2013 21:43:42 +0000

Check intonation at capo 1.

Re: Capo on the 1st Fret

null@example.com (Dirty Ed) — Sun, 30 Jun 2013 11:44:46 +0000

Russell_Harding wrote:

I did have a problem with buzzing on the 2nd fret but the neck truss rod needed adjustment its fine now I just cranked it a few turns and the intonation is dead on and no buzz and I don't have any problems with a capo
Dirty Ed wrote:
Sound like the nut on your Strat needs lowered a little.
DE

Sorry Russel, I was referring to GH's post. I've ran into similar situations where the nut was a little high on some of the acoustics I've bought, causing the strings to be a little high all along the neck. Shaving the saddle will lower the strings a little but they will still be high near the nut so there will be intonation issues when using a capo near the nut. If the neck is adjusted the strings can be lowered over most of the neck but can result in buzzing a few frets below the nut when a capo is placed on the first fret and the intonation issue still not solved. Lowering the nut in conjunction with neck adjustments and/or saddle changes can result in low string height without buzzing and less problems when using a capo.

I've found some nuts that only certain strings were too high, causing them to be affected more by a capo than others and the problem was fixed with a nut file instead of lowering the entire nut.

All my experiences have been involved with acoustics. Electrics may be different.

Re: Capo on the 1st Fret

null@example.com (Russell_Harding) — Sun, 30 Jun 2013 03:31:26 +0000

I did have a problem with buzzing on the 2nd fret but the neck truss rod needed adjustment its fine now I just cranked it a few turns and the intonation is dead on and no buzz and I don't have any problems with a capo

Dirty Ed wrote:

Sound like the nut on your Strat needs lowered a little.
DE

Re: Capo on the 1st Fret

null@example.com (Dirty Ed) — Sun, 30 Jun 2013 00:26:46 +0000

Sound like the nut on your Strat needs lowered a little.

Re: Capo on the 1st Fret

null@example.com (Russell_Harding) — Sun, 30 Jun 2013 00:23:05 +0000

could be to much pressure on light gauge strings I have a kyser too I play a strat and this has happened to me there are several capos that may suit you better I seen on from a topic on Chordie called G7 pro it sells for around 35 dollars or so I think if you get one that has adjustable pressure it may eliminate the tonal problems,thats one idea another possibility is your neck may need adjustment

Capo on the 1st Fret

null@example.com (Guitar Hacker) — Sat, 29 Jun 2013 23:46:56 +0000

I'm not much of a Capo user. Usually I'll just transpose the song to a key I like and not use a capo. I am finding however, that sometimes I just don't have enough fingers and so have started playing around with my capo. I was playing Norwegian Wood and capoing the second fret...and all sounded well (as well as my ears told me) I put the capo on the first fret and even my ears could hear something was amiss. I plugged in my tuner and checked the open tuning and all was fine. I put the capo on the first fret and the tuning was waaaay off. Interestingly, the low E string was REALLY sharp..so sharp that was almost F#....and as I checked the rest of the strings....they became less sharp and finally the high E string actually fine. The Capo is a brand name (Kyser) and it seems to work fine. There's no buzz....and as I move it up the neck, the tuning gets a little sharp but all the strings are equally sharp. So....any idea why the 1st fret is giving me some trouble?? I'm playing my '91 Telecaster with some Lace Sensor pickups.